Draw using grounds !
Click twice on the map to draw a ground !
Hold CTRL And click to make a ground from the previous point to the current one.

Commands :
Use !undo [number] to remove.
Use !set mode [many/whole] to set your drawing. Mode "many" makes you draw a set of grounds seperated from each other , try it. mode whole is the first mode you draw with.
Use !set ground [ground name] to set the ground to draw with, for example : !set ground circle
Use !set color to set your drawing color( for rectangles and circles)
Note : the maximum amount of grounds that you can spawn is 430.

The newest code : http://pastebin.com/Y3rAW2jA

Please report any bugs you find in this thread

Enjoy :)

wikid
dat kewl

700 is more than enough you should lower the planks per person
It's a very good code though.

Fireyone a dit :

700 is more than enough you should lower the planks per person
It's a very good code though.

It's okay, according to the size of planks and their statics, 700 undynamic grounds is ok
but I might make it , 700 plank per map :p

The less might creat a lesser lag though, think about the players and what type of map they play in if you want it to be a map with a small chance of lag like 0 or 1

Fireyone a dit :

The less might creat a lesser lag though, think about the players and what type of map they play in if you want it to be a map with a small chance of lag like 0 or 1

Ok, then, since 1000+ planks will crash the map (Tested this with a map that have only 1 ground) , I'm going to make a limit of 950 planks per map for everyone in the room. That means , they can spawn forever until the Physic Grounds' number reach 950.

(why 950, because the map's max number of grounds is 50 .)
I'll update it later.

Well ok I guess it's reasonable.
and it would have been better to add 100 just for an example and bye the way they can change the code to however many they want.

Fireyone a dit :

Well ok I guess it's reasonable.
and it would have been better to add 100 just for an example and bye the way they can change the code to however many they want.

They can modify it ,ask for help etc... :P

Could you code it so that you can delete a plank you summoned? because sometimes i make mistakes so maybe code it so that it could undo the planks? Maybe by using command !undo.

Sorry for asking too much but,may I ask you for another favour? Maybe do !clear to clear every plank you summoned to make another picture but maybe make it so that it can only clear the planks you summoned and not the other players'? but making the !clear to clear every plank is enough,if you were to only clear the plank you summoned, it would be better.

Thanks!

Cutylilian a dit :

Could you code it so that you can delete a plank you summoned? because sometimes i make mistakes so maybe code it so that it could undo the planks? Maybe by using command !undo.

Sorry for asking too much but,may I ask you for another favour? Maybe do !clear to clear every plank you summoned to make another picture but maybe make it so that it can only clear the planks you summoned and not the other players'? but making the !clear to clear every plank is enough,if you were to only clear the plank you summoned, it would be better.

Thanks!

It's ok, I'll make it now :D
UPDATED !
Real Code

Wow Abdel, I've heard of your work but I've never actually seen it.
Good job!

Cattnessever a dit :

Wow Abdel, I've heard of your work but I've never actually seen it.
Good job!

Good to hear :=)

MAJOR UPDATE !

The newest code : http://pastebin.com/Y3rAW2jA
Click twice on the map to draw a ground !
Hold CTRL And click to make a ground from the previous point to the current one.

Commands :
Use !undo [number] to remove.
Use !set mode [many/whole] to set your drawing. Mode "many" makes you draw a set of grounds seperated from each other , try it. mode whole is the first mode you draw with.
Use !set ground [ground name] to set the ground to draw with, for example : !set ground circle
Use !set color to set your drawing color( for rectangles and circles)

Cool ^^

Keep it up with those cool plugins.

I haven't tried it out yet.. But I already know its awesome! :D ... Keep it up

Small Update :
Added !set height [number] to set the height of each ground, it's 10 by default
Now you can build houses properly ^^
Code : here

aw man, this is pretty cool and awesome for drawing and other things

Zodiacsymbol a dit :

aw man, this is pretty cool and awesome for drawing and other things

Spoiler

Spoiler

Wow :O
These looks absolutely amazing!
Great job!